Objective Direct continuous monitoring of arterial blood pressure is invasive and continuous monitoring cannot be achieved by traditional cuffed indirect blood pressure measurement methods. Previously, continuous non-invasive arterial blood pressure monitoring was achieved by using photoplethysmography (PPG), but it is discrete values of systolic and diastolic blood pressures rather than continuous values constructing arterial blood pressure waves. This study aimed to reconstruct arterial blood pressure wave signal based on CNN-LSTM using PPG to achieve continuous non-invasive arterial blood pressure monitoring.Methods A CNN-LSTM hybrid neural network model was constructed, and the PPG and arterial blood pressure wave synchronized recorded signal data from the Medical Information Mart for Intensive Care (MIMIC) were used. The PPG signals were input to this model after noise reduction, normalization, and sliding window segmentation. The corresponding arterial blood pressure waves were reconstructed from PPG by using the CNN-LSTM hybrid model.Results When using the CNN-LSTM neural network with a window length of 312, the error between the reconstructed arterial blood pressure values and the actual arterial blood pressure values was minimal: the values of mean absolute error (MAE) and root mean square error (RMSE) were 2.79 mmHg and 4.24 mmHg, respectively, and the cosine similarity is the optimal. The reconstructed arterial blood pressure values were highly correlated with the actual arterial blood pressure values, which met the Association for the Advancement of Medical Instrumentation (AAMI) standards.Conclusion CNN-LSTM hybrid neural network can reconstruct arterial blood pressure wave signal using PPG to achieve continuous non-invasive arterial blood pressure monitoring.